Incorrect Measurement For Table 1 "Chassis Dimentions" On Tps; Power Module Must Be Inserted Into The Top Slot Of The Power Module Enclosure In Single Power Module Configuration; Memory Error Handling Mechanism In Bios Is Changed; Table 6. Chassis Dimensions - Intel SR1400SYS - Server Platform - 0 MB RAM Technical Specifications Update

Technical Specification Update
Implication Misleading reference.
Status Doc. This will be corrected in a future release of Intel® Server Board SE7520JR2
TPS.
4

Incorrect measurement for table 1 "Chassis Dimentions" on TPS

Problem Table 1, page XX of Intel® Server Chassis SR2400 Technilcal Product
Specification (TPS) 1.1 shows inaccurate measurements for the chassis
dimensions table. The table should be as follow:
Implication Misleading reference.
Status Doc. This will be corrected in a future release of Intel® Server Chassis SR2400
TPS.
5 Power module must be inserted into the top slot of the power module
enclosure in single power module configuration
Problem Section 2.2 of Intel® Server Chassis SR2400 Technilcal Product Specification
(TPS) 1.0 states the wrong power module population rule in single power module
configuration. In single power module configuration, the power module must be
inserted into the top slot of the power module enclosure. The section 2.2 will be
updated as "In single power module configurations, the power module must be
inserted into the top slot of the power module enclosure. System and Power
Supply thermals are not affected, however the nonoperating slot must have the
power supply blank installed."
Implication If the power module is inserted into the bottom slot in single power module
configuration, the system status LED may be blinking green indicating a
degraded system configuration that does not exist.
Status Doc. This will be corrected in a future release of Intel® Server Chassis SR2400
TPS.
6

Memory error handling mechanism in BIOS is changed

Problem The implementation of the memory error handling mechanism has been changed
since production BIOS P07. So the section 6.2.2 of Intel® Server Board
SE7520JR2 Technilcal Product Specification (TPS) 1.0 will be updated as below.

Table 6. Chassis Dimensions

Height 87.5 mm
Width 430 mm
Depth 672 mm
Max. Weight 27.22 kg
3.445"
16.930"
26.457"
60 Lbs
Documentation Changes
17