Table Of Contents - Intel SR1400SYS - Server Platform - 0 MB RAM Technical Specifications Update

Technical Specification Update
I. Preface......................................................................................................................6
1 Nomenclature .........................................................................................................6
2 Product Scope ........................................................................................................7
II. Summary Tables ......................................................................................................8
III. Errata ......................................................................................................................10
1 Memory Mirroring Not Supported by the System BIOS ........................................10
2 Microsoft Windows* 2003 operating system shows 2 monitors in Device Manager.10
3 Some RAID controllers fail to recognize their Option ROM access hot-key sequence
needed to configure the card during POST ................................................................10
4 Platform Confidence Test (PCT) reports SIO error when no floppy drive is present11
5 Unknown Interrupt Error Message during POST ..................................................11
6 COM Port B Ring Indicator not terminated correctly. ............................................11
7 BMC SEL Timestamp Incorrect Information .........................................................12
8 Current BIOS does not support Legacy Mode for the on-board Serial ATA (SATA) ports
12
9 Non-threshold base sensors mBMC responds threshold value. ...........................12
10 LM93 sensor monitoring issue ...........................................................................13
11 The silk screen identifying the PCI Slot numbers on the Low Profile PCI riser card for the
SR2400 is not consistant with silk screen of the Full Height PCI-X (passive) riser card.13
12 CPU 2 Processor Fault LED illuminated when no processor is installed ...........14
13 Silk screen for onboard SCSI Channels denote the internal SCSI connector as Channel
A and the external SCSI connector as Channel B. However, LSI firmware recognizes them in
opposite order.............................................................................................................14
14 Blinking Green Status LED Associated with FRUSDR 6.6.8 and Earlier on
S7520JR2ATAD2 Server Boards................................................................................14
IV. Documentation Changes ......................................................................................16
1 SATA drive activity LED is driven by both the backplane controller and the Hard Drives
16
2 Incorrect description of 50-pin front panel connector as J1J2...............................16
3 Incorrect pin assignment for table 90 "OEM RMC Connector Pinout (J3B2)" .......16
4 Incorrect measurement for table 1 "Chassis Dimentions" on TPS ........................17
5 Power module must be inserted into the top slot of the power module enclosure in single
power module configuration........................................................................................17
6 Memory error handling mechanism in BIOS is changed.......................................17
7 3-pin cable in SR1450 SATA Backplane Kit is not used with the onboard SATA controller
18
V. FYI - Useful Information .......................................................................................20
1 Onboard CTRL <C> RAID 0, 1 creation appears to be slow and appears to limit the
number of RAID configurations...................................................................................20
2 BIOS will display a warning message when the mBMC System Event Log (SEL) is full
20
3 ID Button/LED functionality with no Intel Management Module (IMM) ..................21
4 mBMC doesn't log the "AC Lost" event when AC power lost. ...............................21

Table of Contents

Table of Contents
iii