Removing The On/Off Reset Board; Removing The Diskette/Cdrom Drive - IBM x 340 Series Hardware Maintenance Manual

Removing the on/off reset board

Removing the diskette/CDROM drive

106
Hardware Maintenance Manual: xSeries 340 Model 6RY
c 1 d
On/Off Reset Board
c 2 d
Screw
To remove the on/off reset board:
1. Remove the cover. See "Removing the cover and bezel" on page 47.
2. Disconnect the cables from the system board.
Remove the screw c 2 d .
3.
Gently pull off the board c 1 d .
4.
c 1 d
Screw
c 2 d
12.7MM Diskette/CDROM Drive
To remove the LED board:
1. Remove the cover. See "Removing the cover and bezel" on page 47.
2. Disconnect the cable.
Remove the screw c 1 d .
3.
Carefully pull out drive c 2 d to remove.
4.