Drive Belt - DAELIM NS125DLX Service Manual

L. Crank Case Cover/Kick Starter/Continuously Variable Transmission
Kick Starter Assembly
● Assemble the kick starter idle gear shaft and the
kick driven gear comp to the left cover.
NOTE
•Apply grease to the spring groove, kick driven
gear, and idle gear wedge.
● As shown in the figure, match the kick driven
gear friction spring with the L. crank case cover
groove, and assemble.
● Match the kick starter spindle with the idle gear
punch mark, and assemble.
● Hold, and turn, in reverse, the kick return spring
arm.
● Assemble the kick stopper plate.

Drive Belt

Removal
● Remove L. crank case cover. (⇨ 7-2)
● Loosen the clutch outer setting nut with a
universal holder.
Tool: Universal holder
Driven gear
Idle gear
Setting nut
7-7