DAELIM NS125DLX Service Manual page 147

● Install the brake caliper into the right front fork.
NOTE
•Be careful not to damage the brake pad.
● Tighten the caliper braket bolt.
Torque: 2.7kg– – m(27N.m, 19ft-lb)
● Install pad pin bolt.
Torque: 1.8kg– – m(18N.m, 13ft-lb)
● Bend the lock plate tangs, and fix the pad pin
bolt.
Rear brake pad replacement
NOTE
•When replacing brake pads, replace whole set.
•Do not remove the brake hose when replacing
brake pads.
● Open the lock plate tangs, and loosen the pad pin
bolt.
● Remove the EX. muffler.(⇨4-9)
● Remove the rear brake caliper from the rear
swing arm.
● To install a new brake pad into the brake, press
the piston to return to the original position.
● Remove the pad pin bolt, lock plate, and brake pad.
● Verify that the pad spring is installed in specific
position.
● Install a new brake pad, lock plate, and pad pin
bolt.
● Install in the reverse order of removal.
Brake caliper
Muffler
Rear brake caliper
Pin bolt
Brake System
Brake pad
14-5