Starter System
Starter Motor
Removal
- Remove the luggage box. (⇨ 4-5)
- Remove the body cover (⇨ 4-6)
● Remove the starter motor cable from the motor.
● Unfasten the 2 starter motor mounting bolts, and
remove the starter motor.
NOTE
• Turn off the main switch prior to servicing the
starter motor. If power is connected, the starter
motor may be activated and damaged.
Inspection
● Check the starter motor terminal with a tester to
determine if power is connected.
Tester: PVA multi-tester
Installation
● Install a new O-ring and apply oil. Insert the
starter motor, and tighten the 2 bolts completely.
NOTE
• Accurately connect the earth terminal to the
starter motor mounting bolts.
● Assemble the luggage box and body cover.
17-2
Bolt
PVA adapter
Bolt