DAELIM NS125DLX Service Manual page 131

● Wrap the bottom case with a piece of cloth, and fix
it to the vise.
● Apply screw locking agent to the socket bolt
thread, and assemble the socket bolt to the fork
piston.
Torque value: 2.0kg-m (20N.m, 14ft-lb)
NOTE
• When a vise is used to hold the bottom case, do
not insert the case itself but insert the bracket.
● Apply ATF to a new oil seal.
● Assemble the oil seal to the bottom case.
● Insert the oil seal with special tools until the
attachment groove of the bottom case set ring is
exposed.
Tools: Fork seal driver
Fork seal driver body
● Install the set ring.
● Accurately assemble the set ring to the bottom
case.
● Install the dust seal.
● Fill a prescribed amount of automatic transmission
fluid(ATF) into the fork tube.
Capacity: 80㎤ ㎤
● Slowly press the fork tube 2-3 times to discharge
air.
Front Wheel/Front Fork/Steering
Fork oil
Socket bolt
Fork seal driver
Attachment
Set ring
Oil level
12-13