DAELIM NS125DLX Service Manual page 57

● Remove the engine.
(with the rear swing arm and rear wheel attached)
● Remove the rear swing arm.
● Remove the rear wheel. (⇨ 13-3)
Engine Installation
● Install in the reverse order of removal.
NOTE
• Take precautions not to damage wiring and cable.
• Take precautions not to damage the threaded part of
bolts.
• Arrange the cable, tubes and wiring in the right
positions.
Toque:
Engine hanger bolt:(Front)2.7kg-m(27N.m, 20ft-lb)
(Rear)3.5kg-m(35N.m, 25ft-lb)
● Check the following after the engine is assembled.
- Engine oil
- Electric systems
Engine Removal
Rear swing arm
6-3