Movable Drive Face - DAELIM S2 125 Service Manual

FACE BOSS

MOVABLE DRIVE FACE

SLIDE PIECE
MOVABLE DRIVE
RAMP PLATE
FACE COMP
LH. CRANKCASE COVER/CONTINUOUSLY VARIABLE TRANSMISSION
● Reinstall the driven pulley on the drive shaft with the
● Hold the clutch outer using the universal holder.
● Reinstall the LH. crankcase cover. (
MOVABLE DRIVE FACE
REMOVAL
● Remove the LH. crankcase cover. (
● Hold the drive face using the drive face holder and
● Remove the kick starter ratchet and drive face.
● If the drive face holder cannot be used, remove the
● Remove the drive belt. (
● Remove the movable drive face and drive face boss.
● Remove the ramp plate, weight rollers and oil seal
DRIVE FACE
BOSS
WEIGHT
ROLLER
drive belt attached.
Tighten the nut to the specified torque.
TORQUE VALUE : 5.0-6.0 kgf·m
TOOL : UNIVERSAL HOLDER
remove the nut.
TOOL : DRIVE FACE HOLDER
cooling fan at the right side of the crankshaft, and hold
the flywheel with the universal holder.
TOOL : UNIVERSAL HOLDER
@ @ @ @ @ @ @ @ @ @ @ ? ? V / X f
@ ? h f V / X ? e
@ ? @ ? h f ? V / X e
@ ?
@ ? h f ? W . Y e
@ @ @ @ @ @ @ @ @ @ @ ? e W . Y ? e
from the movable drive face.
7-2 )
) X h
@ ) X ? g
@ V / X g
@ @ @ @ @ @ @ @ @ @ @ ? ? V / X f @ ? V / X ? f
@ ? h f V / X ? e
@ ? h f ? V / X e
@ ? @ ? N 1 e J 5 e
@ ? h f ? W . Y e
@ @ @ @ @ @ @ @ @ @ @ ? e W . Y ? e
@ ? ? W . Y f
@ W . Y g @ ? W . Y ? f
@ ( Y ? g
( Y h
7-2 )
) X h
@ ) X ? g
@ ? V / X ? f @ V / X g
@ @ @ @ @ @ @ @ @ @ @ ? ? V / X f
@ ? h f V / X ? e
@ ? h f ? V / X e @ ? N 1 e
@ ? J 5 e
@ ? h f ? W . Y e
@ @ @ @ @ @ @ @ @ @ @ ? e W . Y ? e
@ ? W . Y ? f @ ? ? W . Y f
@ W . Y g
@ ( Y ? g
( Y h
7-3 )
) X h
@ V / X g @ ) X ? g
@ ? V / X ? f
N 1 e
J 5 e
@ ? ? W . Y f @ ? W . Y ? f
@ W . Y g
@ ( Y ? g
( Y h
7-5