Table of Contents
Advertisement
Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
Complete the following steps to remove the bezel:
1. Unlock the side-cover lock.
2. Remove the side cover (see "Removing the side cover" on page 26).
3. Locate the bezel-release lever; then, press the bezel-release lever toward the
4. Pull the top of the bezel away from the chassis; then, push the bezel down to
5. Remove the bezel from the server and store the bezel in a safe place.
For instructions for replacing the bezel, see "Replacing the bezel" on page 50.
front of the server.
disengage the bottom tabs.
Chapter 4. Installing options
27
Advertisement
Table of Contents
