Installing A Drive - IBM 84875MU User Manual

10. If you have other options to install or remove, do so now; otherwise, replace

Installing a drive

Depending on the server model, one or more of the following drives might be
installed in the server:
v Diskette
v Hard disk drive
v CD-ROM, CD-RW, or DVD/CD-RW combo
For information on replacing a CD-ROM drive or diskette drive, see "Replacing the
CD-ROM drive in bay 2" on page 35 and "Replacing the diskette drive in bay 3" on
page 36.
Some hot-swap models come with an IDE CD-ROM drive in bay 1, a 3.5-in., 1.44
MB diskette drive in bay 3, and three hot-swap hard disk drive bays.
Some non-hot-swap models come with an IDE CD-ROM drive in bay 1, a 3.5-in.,
1.44 MB diskette drive in bay 3, and a SCSI hard disk drive in bay 7.
Some simple-swap Serial ATA models come with an IDE CD-ROM drive in bay 1, a
3.5-in., 1.44 MB diskette drive in bay 3, and a simple-swap Serial ATA hard disk
drive in bay 7.
the support bracket (see "Removing and installing the support bracket" on
page 28) and go to "Completing the installation" on page 50.
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7
Recess area Door hatch
Chapter 4. Installing options
31