IBM 84875MU User Manual page 18

The server can be turned off in any of the following ways:
v You can turn off the server from the operating system, if the operating system
v You can press the power-control button to start an orderly shutdown of the
v If the operating system stops functioning, you can press and hold the
v If the server is connected to an Advanced System Management (ASM)
v If an optional Remote Supervisor Adapter II is installed in the server, the server
v If the Wake on LAN feature turned on the server, the Wake on LAN feature can
v The server can turn itself off as an automatic response to a critical system
8
xSeries 206 Type 8482 and 8487: Hardware Maintenance Manual and Troubleshooting Guide
Statement 5
CAUTION:
The power control button on the device and the power switch on the power supply do
not turn off the electrical current supplied to the device. The device also might have
more than one power cord. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
supports this feature. After an orderly shutdown of the operating system, the
server will be turned off automatically.
operating system and turn off the server, if the operating system supports this
feature.
power-control button for more than 4 seconds to turn off the server.
interconnect network that contains at least one system with an optional Remote
Supervisor Adapter II installed, the server can be turned off from the Remote
Supervisor Adapter II user interface.
can be turned off from the Remote Supervisor Adapter II user interface.
turn of the server.
failure.