Before You Begin
Try this First
System Setup Checklist
If you have a problem with OmniForm, first check that your computer,
scanner, and other applications are functioning properly.
Make backups of OmniForm files regularly, preferably in a location
other than your hard drive. This could save you hours or days of work
if the unexpected happens: file deletion or corruption caused by disk
crashes, viruses, or user error.
It may help to try either of the following:
• Turn off your computer, restart your scanner, and then restart
your computer.
• Reinstall OmniForm.
• Make sure that your system meets all requirements as listed in
"System Requirements" on page 8.
• Make sure that your scanner is plugged in and turned on, and
that all cable connections are secure.
• Use the software that came with your scanner to verify that it
works properly in Windows before using it with OmniForm.
• Fix Windows problems before using OmniForm again.
• Run virus-checking software regularly.
• Defragment your hard disk occasionally. In Windows 95, click
Start in the Taskbar and choose Programs
Tools
Disk Defragmenter. See your Windows documentation if
you need to install this utility.
Windows 3.1 and NT users: check your Windows documentation
for information on defragmenting your hard disk.
• Scan your disk for errors if you experience a recurring problem.
In Windows 95, click Start in the Taskbar and choose
Programs
Accessories
Windows documentation if you need to install this utility.
Windows 3.1 and NT users: run the DOS utilities CHKDSK or
ScanDisk if you have either one.
Accessories
System Tools
ScanDisk. See your
Technical Information - 257
Before You Begin
System