The Design View Toolbars; The Standard Toolbar - NUANCE OMNIFORM 2 Reference

The Design View Toolbars

The Standard Toolbar

Form
New Save
Assistant
Open Scan
This section describes each toolbar in design view and defines its
buttons. Design view contains five toolbars:
• the standard toolbar
• the font/text toolbar
• the drawing toolbar
• the arrange toolbar
• the calculation toolbar (See Chapter 9, Using Calculations, for
information on this toolbar and its functions.)
In Windows 95, you can drag these toolbars to any other location in the
OmniForm window.
Use the standard toolbar for basic file operations such as saving and
printing. Use it also to define and format the fields you create.
Print
Cut Paste
Preview
Print Spelling Copy
All buttons correspond to menu commands of the same name.
Below is a brief explanation of each button's function. All corresponding
menu commands are explained in "Menu Commands" on page 110.
Processes such as scanning or opening a form are explained in Chapter
5, OmniForm Procedures.
New — Open a new, blank form in design view.
Open — Open an OmniForm file.
Save — Save changes made to your current form.
Scan Form — Scan a paper form or to import an image file into
OmniForm.
Form Assistant — Open the Form Assistant dialog box.
Print — Print the current form on a printer, to disk as a file, or as a
macro.
Highlight
Definition Calculation
Fill Fill Areas
Design Zoom Object
Appearance
The Design View Toolbars
Object
Help
Size and Tab
Position Order
Designing a Form - 121