Creating A Fill Text Object - NUANCE OMNIFORM 2 Reference

• Select Stretch to Fit to change your graphic's original shape
• Select Just Change the Options for this Graphic if the graphic
• Select Store a Copy of the Graphic with the Form to place a copy
2 Click OK.
OmniForm scans or loads the graphic, depending on the
selected source. The graphic appears in the Graphic object box.

Creating a Fill Text Object

Use a fill text field wherever you want to enter text in fill view. Fill text
fields are commonly used for information such as name, company,
address, comments, and so forth.
1 Click the Fill Text tool in the drawing toolbar.
2 Draw the fill text object.
To create a square field, hold down the Shift key as you draw.
and size to fit in the fill graphic field.
This option does not maintain a graphic's original
proportions. Depending on the shape of the fill graphic field,
your graphic may be stretched or compressed. You might
want to use this for special effects.
object contains a graphic already.
This changes how the graphic appears without reimporting it.
of the graphic directly in the form. This increases form size
depending on graphic file size. Otherwise, OmniForm loads
the graphic each time you open the form. If you move the
original graphic, OmniForm cannot load it and it will not
appear in the form until you reimport it.
This option only appears if Graphic File is selected in the Source
drop-down list.
Creating Objects
Designing a Form - 133