Scan Or Import The Sample Form - NUANCE OMNIFORM 2 Reference

Tutorial 2 — Edit and Design a Form
Launch OmniForm

Scan or Import the Sample Form

You will scan or import the Sample form into OmniForm again in this
exercise. This time, you will bypass the Form Assistant dialog box so
that you can see which buttons and menu commands to use. You will
verify and correct OCR, and practice redesigning the form. See Chapter
6, Designing a Form, for detailed information on form design.
If OmniForm is already open, proceed to the next section.
1 Click Start in the taskbar and choose Programs
launch OmniForm if it is not open already.
Windows NT and 3.1 users: double-click the OmniForm icon in
the Caere Applications folder.
2 Click Cancel in the Form Assistant dialog box when it appears.
See below for instructions on scanning the sample form. See page 29
instructions on importing the sample.tif image file.
To scan the form:
1 Click the Scan Form button in the standard toolbar or choose
Scan Form... in the File menu.
The Scan Form dialog box appears.
2 Select an option in the Source drop-down list.
• Select HP Scanner in the Source drop-down list if you have an
HP scanner. Proceed to step 3.
• Select TWAIN in the Source drop-down list if you have a
TWAIN-compatible scanner.
Tutorial 2 — Edit and Design a Form

OmniForm to
Tutorials - 28