Saving In Fill View - NUANCE OMNIFORM 2 Reference

Saving in Fill View

You will notice that if you close a form after making data entries in fill
view (but no changes in design view) that OmniForm does not prompt
you to save the changes. This is because OmniForm saves automatically
in fill view.
OmniForm saves after numerous user actions: moving from one record
to another, printing or closing a form, before importing or exporting
data, and in many other situations. You would rarely need to use the
Save command in fill view except to:
• Save changes to the entire form, both changes made in design
view and data entered in fill view.
• Save information entered in the Print offsets for data option in the
Print dialog box.
Use the Save As... command in fill view to save a form to another location
or with a different file name.
Saving in Fill View
Filling a Form - 191