System Requirements; Registering Omniform - NUANCE OMNIFORM 2 Reference

System Requirements

Registering OmniForm

To install and run OmniForm, you need the following setup:
• Computer with an 80386 or higher processor.
• VGA or SVGA monitor.
• Windows-compatible mouse.
• 1.44MB high-density floppy disk drive and internal hard disk.
• A minimum of 11MB hard disk space for the US version; 15MB
for the International English version.
• If you plan to scan forms, you need a Hewlett-Packard (ScanJet
Plus or above), Visioneer, or TWAIN-compatible scanner.
• Total system memory of at least 8MB RAM for Windows 95 and
Windows 3.1; 12MB for Windows NT.
• At least a 4MB permanent swap file for Windows 3.1.
• MS-DOS 5.0 or above for Windows 3.1.
OmniForm 2.01 for Windows 95 and Windows NT will not run on
earlier versions of Windows.
Registering your copy of OmniForm entitles you to technical support,
notification of special offers and upgrades, and the lowest price offered
on the next OmniForm upgrade.
Please complete and send in the registration card included in your
OmniForm package.
See "Caere Product Support" on page 271 for information on technical
support.
System Requirements
Installation and Setup - 8