Cf_Backgnd Command; Cf_Logo Command; Cf_Highland Command; Cf_On-Sta Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications

8.10.4 CF_BACKGND Command

Command "CF_BACKGND_%1" [CR]
"BLUE" -------------------- Select Blue Back
"BLACK" ------------------ Select Black Back
%1 "RED" ---------------------- Select Red Back
"GREEN" ------------------ Select Green Back
"WHITE" ------------------- Select White Back
Set Background.(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and the setting remains
Details
even after the power is ALL OFF.
No display is shown when projector received this command.
Acceptable
Response
Unacceptable

8.10.5 CF_LOGO Command

Command "CF_LOGO_%1_%2"[CR]
"ON" -------------------------- Set Logo display ON
%1
"OFF" ------------------------- Set Logodisplay OFF
Set Logo. (Available only in the normal Power ON status)
The value set by this command is stored in EEPROM and its setting is effective
Details
even after ALL is OFF.
No display is shown when projector received this command.
Acceptable
Response
Unacceptable

8.10.6 CF_HIGHLAND Command

Command "CF_HIGHLAND_%1" [CR]
"ON" -------------------------- Set High land ON
%1
"OFF" ------------------------- Set High land OFF
Set up High-altitude function. (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is
Details
effective even after ALL is OFF.
No display is shown when projector received this command.
Acceptable
Correspondence
Unacceptable

8.10.7 CF_ON-STA Command

Command "CF_ON-STA_%1" [CR]
"ON" --------------------------- Set Direct-Power-On ON
"OFF" ------------------------- Set Direct-Power-On OFF
"UP" --------------------------- Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
%1
"DN" --------------------------- Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
Note) "UP" and "DN" behave the same.
Set up Direct-Power-On function. (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is
Details
effective even after ALL is OFF.
No display is shown when projector received command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000"[CR]
"Error Code"[CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
25 / 42