Cf_Coltemp Command; Cf_Colset_%1_%2 Command; Cf_Colspace Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications
8.4.9

CF_COLTEMP Command

Command "CF_COLTEMP_%1" [CR]
"HIGH" ------------------------------Select High
%1 "MEDIUM" ------------------------- Select Medium
"LOW" ------------------------------ Select Low
Set Color Temperature
Details (Available only in the normal Power ON status)
No display is shown when projector received command.
Acceptable
Correspondence
Unacceptable

8.4.10 CF_COLSET_%1_%2 Command

Command "CF_COLSET_%1_%2"[CR]
Set value of %1
"RGAIN"------------------------ Select Red Gain
"GGAIN"------------------------ Select Green Gain
"BGAIN"------------------------ Select Blue Gain
"RBIAS"------------------------ Select Red Bias
%1 "GBIAS"------------------------ Select Green Bias
"BBIAS"------------------------ Select Blue Bias
"CYAN" ------------------------ Select Cyan
"YELLOW" -------------------- Select Yellow
"MAGENTA" ------------------ Select Magenta
"RST" --------------------------- Select Reset
Set value of %2
"-50~050"------------------Directly specify setting value.
"RST" -----------------------Reset the mode of Color setting
%2
Exÿ CF_COLSET-RGAIN_005 --- Set Color settingÿ Red Gain value to 5
Set value of each item of Color setting
Details (Available only in the normal Power ON status)
No indication display is shown when receiving the command.
Acceptable
Correspondence
Unacceptable

8.4.11 CF_COLSPACE Command

Command "CF_COLSPACE"[CR]
"AUTO"------------------------ Select Auto
%1 "RGB"-------------------------- Select RGB
"YUB"-------------------------- Select YUV
Set value of Color space. (Available only in the normal Power ON status)
Details
No indication display is shown when receiving the command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
CF_COLSET-SET_SET --- Reset the value of Color setting
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
17 / 42