Input Control Command; Cf_Input Command; Cf_Source Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications

8.6 Input Control Command

8.6.1

CF_INPUT Command

Command "CF_INPUT_%1" [CR]
"COMPUTER" ------------------- Select Computer
%1 "S-VIDEO" ------------------------ Select S-video
"VIDEO" --------------------------- Select Video
Select Input
(Valid only in the normal Power ON status.)
Details This command works the same as "Computer"/"VIDEO"/"S-VIDEO" button of
the remote control.
The projector shows indication display when receiving the command.
Acceptable
Correspondence
Unacceptable
8.6.2

CF_SOURCE Command

Command "CF_SOURCE_%1" [CR]
%1 "SET" ---------------------------- Switch the input source.
Switch the input source in order below.
Computer - S-video - Video
Details (Valid only when it is in the normal Power ON status.)
This command works the same as "INPUT" button of the remote control.
The projector shows indication display when receiving the command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
19 / 42