PDG-DSU30 Expand Serial Command Functional Specifications
5.
Functional Execution Command Table
5.1.
Image Command Table
Execute command
CF_IMAGE_%1[CR]
CF_BRIGHT_%1[CR]
CF_CONT_%1[CR]
CF_SHARP_%1[CR]
CF_COLOR_%1[CR]
CF_TINT_%1[CR]
CF_GAMMA_%1[CR]
CF_BCOLOR_%1[CR]
CF_COLTEMP_%1[CR]
CF_COLSET-%1_%2[CR]
CF_COLSPACE_%1[CR]
5.2.
PC Control Command Table
Execute command
CF_FSYNC_%1[CR]
CF_TDOTS_%1[CR]
CF_H-POS_%1[CR]
CF_V-POS_%1[CR]
5.3.
Input Control Command Table
Execute command
CF_INPUT_%1[CR]
CF_SOURCE_%1[CR]
5.4.
Screen Command Table
Execute command
CF_SCREEN_%1[CR]
CF_OVERSCAN_%1[CR]
CF_DZOOM_%1[CR]
CF_KEYSTONE _%1[CR]
CF_MOUNTING_%1[CR]
CF_VPOS_%1[CR]
CF_HPOS_%1[CR]
5.5.
Lamp Command Table
Execute command
CF_LAMPH_%1[CR]
CF_LAMPMODE_%1[CR]
5.6.
Sound Command Table
Execute command
CF_VOLUME_%1[CR]
CF_MUTE_%1[CR]
Item
Set Image mode Preset
Set value of Brightness
Set value of Contrast
Set value of Sharpness
Set value of Color
Set value of Tint
Set value of Gamma Correction
Set value of Brilliant Color
Set level of Color Temperature
Set value of Color setting
Set value of Color space
Item
Set value of Fine sync
Set value of Total dots
Set value of Horizontal Position
Set value of Vertical Position
Item
Select Input
Select Source
Item
Select Aspect Ratio.
Set value of Overscan.
Set value of D.zoom.
Set Keystone Correction
Select Mounting mode
Set value of V Position.
Set value of H Position.
Item
Reset total lamp running time for each lamp
Set "Eco mode".
Item
Set value of Volume.
Set ON/OFF of Sound Mute.
9 / 42