Image Status Read Commands; Cr_Image Command; Cr_Bright Command; Cr_Cont Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications

9.4 Image Status Read Commands

9.4.1

CR_IMAGE Command

Command "CR_IMAGE" [CR]
Details Get image setting status.
Acceptable
Correspondence
Unacceptable
9.4.2

CR_BRIGHT Command

Command "CR_BRIGHT" [CR]
Details Get user controlled value of Brightness
Acceptable
Correspondence
Unacceptable
9.4.3

CR_CONT Command

Command "CR_CONT" [CR]
Details Get user controlled value of Contrast
Acceptable
Correspondence
Unacceptable
9.4.4

CR_SHARP Command

Command "CR_SHARP" [CR]
Details Get user controlled value of Sharpness
Acceptable
Correspondence
Unacceptable
9.4.5

CR_COLOR Command

Command "CR_COLOR" [CR]
Details Get user controlled value of Color
Acceptable
Correspondence
Unacceptable
"000_%1" [CR]
"PRESEN" ------------------- Presentation is selected.
"BRIGHT" -------------------- Bright is selected.
"MOVIE ----------------------- Movie is selected.
"SRGB" ----------------------- sRGB is selected.
%1
"BLACKBOARD" ----------- Blackboard is selected.
"CLASSROOM" ------------ Classroom is selected.
"USER1" --------------------- USER1 is selected.
"USER2" --------------------- USER2 is selected.
"Error Code" [CR] ------ When command is invalid in the
"?" [CR] ----------------- When unknown command is received
"000_%1" [CR]
%1 "000" – "100"
"Error Code" [CR]
"000_%1" [CR]
%1 "000" – "100"
"Error Code" [CR]
"000_%1" [CR]
%1 "000" – "031"
"Error Code" [CR]
"000_%1" [CR]
%1 "000" – "100"
"Error Code" [CR] ------ When command is invalid in the
"?" [CR] ----------------- When unknown command is received
30 / 42
given condition.
given condition .