Cf_Mounting Command; Cf_Vpos Command; Cf_Hpos Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications
8.7.5

CF_MOUNTING Command

Command "CF_MOUNTING_%1" [CR]
"FDESKTOP" ------------------ Select Front-Desktop
"RDESKTOP" ------------------ Select Rear-Desktop
%1
"FCEILING" --------------------- Select Front-Ceiling
"RCEILING" -------------------- Select Rear-Ceiling
Select Mounting mode. (Valid only when in the normal Power ON status.)
Details
No indiction is displayed on the screen by receiving this command.
Acceptable
Correspondence
Unacceptable
8.7.6

CF_VPOS Command

Command "CF_VPOS_%1"[CR]
"050" --------- +50
"049" --------- +49
"002" --------- +2
"001" --------- +1
"000" --------- +0
%1 "-01" ---------- -1
"-02" ---------- -2
"-49" ---------- -49
"-50" ---------- -50
"UP" ---------- Vertical Position setting value + 2
"DN" ---------- Vertical Position setting value – 2
Set Signal-V Position
Details This command is available in normal Power ON status.
No indiction is displayed on the screen by receiving this command.
Acceptable
Correspondence
Unacceptable
8.7.7

CF_HPOS Command

Command "CF_HPOS_%1"[CR]
"050" --------- +50
"049" --------- +49
"002" --------- +2
"001" --------- +1
"000" --------- +0
%1 "-01" ---------- -1
"-02" ---------- -2
"-49" ---------- -49
"-50" ---------- -50
"UP" ---------- Horizontal position setting value + 2
"DN" ---------- Horizontal position setting value – 2
Set Signal-H Position
Details This command is available in normal Power ON status.
No indiction is displayed on the screen by receiving this command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
ÿ
ÿ
"000" [CR]
"Error Code" [CR]
ÿ
ÿ
"000" [CR]
"Error Code" [CR]
21 / 42