PDG-DSU30 Expand Serial Command Functional Specifications
9.7 Screen Status Read Commands
9.7.1
CR_SCREEN Command
Command
"CR_SCREEN" [CR]
Details
Get currently selected screen image size
Acceptable
Correspondence
Unacceptable
9.7.2
CR_OVERSCAN Command
Command
"CR_OVERSCAN" [CR]
Details
Get current setting of Overscan
Acceptable
Correspondence
Unacceptable
9.7.3
CR_DZOOM Command
Command
"CR_DZOOM" [CR]
Details
Get current setting D.zoom
Acceptable
Correspondence
Unacceptable
9.7.4
CR_MOUNTING Command
Command
"CR_MOUNTING" [CR]
Details
Get current setting of mounting
Acceptable
Correspondence
Unacceptable
9.7.5
CR_VPOS Command
Command
"CR_VPOS"[CR]
Details
Get setting status of Vertical Position
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"NORMAL" ----------- Select 4:3 screen display
"WIDE1" -------------- Select 16:9-i screen display
%1
"WIDE2" -------------- Select 16:9-ii screen display
"TRUE" ---------------- Select native screen display
"AUTO" --------------- Select Auto
"Error Code" [CR] ---------- When command is invalid in the
"?" [CR] -------------------- When unknown command is
"000_%1" [CR]
%1
"000"-"003"
"Error Code" [CR]
"000_%1" [CR]
%1
"-05"-"025"
"Error Code" [CR]
"000_%1" [CR]
"FDESKTOP" ------------------ Front-Desktop is selected
"RDESKTOP" ------------------ Rear-Desktop is selected
%1
"FCEILING" -------------------- Front-Ceiling is selected
"RCEILING" -------------------- Rear-Ceiling is selected
"Error Code" [CR]
"000_%1"[CR]
"-50" ~ "050"
"Error Code"[CR]
35 / 42
given condition
received