PDG-DSU30 Expand Serial Command Functional Specifications
7
Error Code Table
Error Code
-When the received data which cannot be decoded.
?
-Parameter designation error (wrong digit number, including invalid
value, etc.)
Normal reception.
000
(This is "Not" error.)
101
Specified function is not available in the selected mode.
102
Specified value is out of range. (Not reflected)
Command mismatched to Hardware (The command is for the
103
Optional function which is not implemented)
Increased/decreased value is out of range in the item which is
201
specified with numerical parameter or changeable numerical value.
Contents
13 / 42