PDG-DSU30 Expand Serial Command Functional Specifications
8.10.12 CF_INFODISP Command
Command
"CF_INFODISP_%1"[CR]
"ON" --------------------- Set Information hide On
%1
"OFF" ------------------- Set Information hide Off
Set up Information hide. (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is effective
Details
even after ALL is OFF.
No display is shown when projector received command.
Acceptable
Response
Unacceptable
8.10.13 CF_FDEFAULT Command
Command
"CF_FDEFAULT_%1" [CR]
%1
"RST"
Execute Option-Reset. (Valid only in the normal Power ON status)
Details
No display is shown when projector received this command.
Acceptable
Correspondence
Unacceptable
"000"[CR]
"Error Code"[CR]
"000" [CR]
"Error Code" [CR]
27 / 42