T640 Safety Guidelines And Warnings; General Safety Guidelines For M Series, Mx Series, And T Series Routers - Juniper T640 Hardware Manual

Related
Documentation

T640 Safety Guidelines and Warnings

General Safety Guidelines for M Series, MX Series, and T Series Routers

Copyright © 2010, Juniper Networks, Inc.
Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation
som kan leda till personskada. Innan du utför arbete på någon utrustning
måste du vara medveten om farorna med elkretsar och känna till vanligt
förfarande för att förebygga skador.
General Safety Warnings for M Series, MX Series, and T Series Routers on page 304
Installation Safety Warnings for M Series, MX Series, and T Series Routers on page 310
Maintenance and Operational Safety Warnings for M Series, MX Series, and T Series
Routers on page 319
General Electrical Safety Warnings for M Series, MX Series, and T Series Routers on
page 325
DC Power Electrical Safety Warnings for M Series, MX Series, and T Series Routers on
page 330
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 303
General Safety Warnings for M Series, MX Series, and T Series Routers on page 304
T640 Preventing Electrostatic Discharge Damage on page 306
The following guidelines help ensure your safety and protect the router from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in this documentation. Make sure that
only authorized service personnel perform other system services.
Keep the area around the chassis clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the chassis.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
Appendix A: T640 Safety and Regulatory Compliance Information
303