Committing The Configuration - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide

Committing the Configuration

Related
Documentation
142
Display the configuration to verify that it is correct.
1.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
backup-router address;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
Commit the configuration to activate it on the router.
2.
[edit]
root@# commit
Optionally, configure additional properties by adding the necessary configuration
3.
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
When you have finished configuring the router, exit configuration mode.
4.
[edit]
root@host# exit
root@host>
T640 Router Description on page 3
Powering On a DC-Powered T640 Router on page 130
Preparing to Configure the T640 Router on page 139
Copyright © 2010, Juniper Networks, Inc.