T640 Core Router Hardware Guide
250
Removing the T640 Standard Cable Restraint from a Three-Input 240-A DC Power
Supply
The cable restraint is located on the right edge of the power supply faceplate. To remove
the standard cable restraint from a three-input 240-A DC power supply:
Loosen the captive screw on the standard cable restraint or captive screws on the
1.
optional cable restraint.
Remove the cable restraint from the power supply.
2.
Figure 134: Standard Cable Restraint on a Three-Input 240-A DC Power
Supply
Installing the T640 Optional Cable Restraint on a Three-Input 240-A DC Power Supply
To install the optional cable restraint on a three-input 240-A DC power supply:
Align the two captive screws on the optional cable restraint with the two threaded
1.
holes located at the right edge of the power supply faceplate.
Fasten the captive screws.
2.
Copyright © 2010, Juniper Networks, Inc.