Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 166

160 U F
SING THE LOW
Step 1
Step 2
V
IEWER
Table 7-4 Aggregate Flows (continued)
Aggregate Option
Src IP/ Application
Src IP/ Dst IP
Src ASN/ Dst ASN
Dst IP/ Protocol
Dst IP/ Application
Dst Port/ Protocol
Dst Port/ Application
Application/ Src QOS/
Dst QOS
Application/ Src IF
Index/ Dst IF Index
Dst Port/ Src IF Index/
Dst IF Index
Src IF Index/ Dst IF
Index
View/ Object
To view aggregate flows:
Click the Flow Viewer tab.
The Flow Viewer window appears.
From the Display drop-down list box, choose one of the following options:
If you select Unioned Flows, see
a
parameters that appear.
If you select Source or Destination IP:
b
Table 7-5 Source or Destination Parameters
Parameter
Current Filters
Description
Displays a summarized list of flows grouped by the source
IP address and the application responsible for the flow.
Displays a summarized list of flows grouped by the source
and destination IP addresses.
Displays a summarized list of flows grouped by the source
and destination ASN numbers.
Displays a summarized list of flows grouped by the
destination IP address and protocol.
Displays a summarized list of flows grouped by the
destination IP address and the application responsible for
the flow.
Displays a summarized list of flows grouped by the
destination port and the protocol associated to the flow.
Displays a summarized list of flows grouped by the
destination port and the application responsible for the flow,
Displays a summarized list of flows grouped by the
application responsible for the flow, the source QOS, and
the destination QOS.
Displays a summarized list of flows grouped by the
application responsible for the flow, the source ifIndex, and
the destination ifIndex.
Displays a summarized list of flows grouped by the
destination port, source ifIndex, and the destination ifIndex.
Displays a summarized list of flows grouped by the source
and destination ifIndex.
Displays the summarized list of flows grouped by the
view/object.
Table 7-2
Description
The top of the table displays the details of the filter applied to the
search results. To clear these filter values, click Clear Filter.
STRM Users Guide
for additional details on the