Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 82

76 M S
ANAGING ENTRIES
Step 6
Table 4-22 Default Variables (continued)
Parameter Description
$$SmallWindow Specify an extended period of time you wish to the system to
monitor flows in your network. This allows the system a basis of
comparison for traffic over an extended period of time. If the large
window and small window values exceed a certain threshold, the
sentry generates an alert. This variable is for anomaly sentries.
$$LargeWindow Specify a period of time you wish to the system to monitor flows
in your network. This allows the system a basis of comparison for
traffic over an smaller period of time. If the large window and
small window values exceed a certain threshold, the sentry
generates an alert.
$$Upperbound/ For each threshold, specify the number that must be exceeded
Lowerbound for this sentry to generate an alert. This variable is for threshold
sentries.
$$AutoLearnTime Specify the time stamp of the time when you wish the system to
stop learning. This variable is for threshold sentries.
Click Save.
STRM Users Guide