Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 168

162 U F
SING THE LOW
V
IEWER
Table 7-6 Aggregate Parameters (continued)
Parameter
Destination Port
Destination
Network
Application
Bytes In
Bytes Out
Total Bytes
Packets In
Packets Out
Total Packets
Host Count
Count
If you select Source Port, Destination Port, Application, Protocol, Flow
d
Direction, ICMP type, Source Network/ Destination Network/ Protocol,
Source IP to Destination IP, Source ASN/ Destination ASN, Destination
Port/ Protocol, Destination Port/ Application, Application/ Source IF Index/
Destination IF Index, Destination Port/ Source IF Index/ Destination IF
Index, Source IP/ Destination IP, Source ASN/ Destination ASN, Flow
Sources, Flow Source/ Interface, Source Network/ Destination Network/
Destination Port/ Protocol, or Source IF Index/ Destination IF Index:
Note: The column layout of the data depends on the chosen aggregate option.
Table 7-7 Application
Parameter
Current Filters
Graphs
Legend Reference A colored box in this field associated this flows to the graph.
Application
Description
Specifies the destination port of the flow. If there are multiple
destination ports associated with this event, this field indicates
Multiple and the number.
Specifies the destination network of the flow. If there are multiple
destination networks associated with this event, this field
indicates Multiple and the number.
Specifies the application that generated the flows. If there are
multiple applications associated with this event, this field
indicates Multiple and the number.
Specifies the number of bytes sent to the IP address.
Specifies the number of bytes sent from the IP address.
Specifies the total number of bytes associated with this IP
address.
Specifies the number of packets sent to the IP address.
Specifies the number of packets sent from the IP address.
Specifies the total number of packets associated with this IP
address.
Specifies the number of hosts the IP address has communicated
with.
Specifies the number of flows the IP address has sent or
received.
Description
The top of the table displays the details of the filter applied to the
search results. To clear these filter values, click Clear Filter.
Displays a bar chart representing the top 10 aggregates,
depending on the chosen aggregate option. Click Hide Chart if
you wish to remove the graph from your display.
Specifies the application that generated the flows.
STRM Users Guide