Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 179

Table 8-2 Asset Window
Parameter
Weight
Last Seen
Hint: To view additional information about this asset, move your mouse over the IP
address.
To view the asset in detail, double-click the asset.
Step 6
The Asset Profile window appears.
The Asset Profile window provides the following information:
Table 8-3 Asset Profile Window
Parameter
Name
Description
IP Address
Operating System
Host Name (DNS Name) Specifies the IP address or DNS name of the asset.
VA Risk Level
How Threatening
Description
Specifies the asset weight of the asset.
Specifies the last date and time that the asset appeared. If the
asset was manually entered but never actively or passively seen,
the column indicates Never.
Description
Specifies the name of the asset.
Specifies a description for this asset.
Specifies the IP address of the asset.
Specifies the operating system running on the asset.
Specifies the vulnerability assessment risk level (0 to 10)
for the asset where 0 is the lowest and 10 is the highest.
This is a weighted value against all other hosts in your
deployment.
Specifies the threat level (0 to 10) posed by the asset
where 0 is the lowest and 10 is the highest. This is a
weighted value against all other hosts in your deployment.
STRM Users Guide
Searching Asset Profiles 173