•
•
Click the arrow next to Advanced Configuration to reveal the configuration
Step 5
parameters.
For the Throttle Timeout parameter, specify the number of milliseconds you wish
Step 6
the Adaptive Log Exporter to check for device changes. The default is 500.
Configure the device specific parameters.
Step 7
For more information, see the appropriate section for the device specific
configuration.
From the menu, select File > Save.
Step 8
Repeat for each device you wish to configure.
Step 9
From the menu, select File > Save All.
Step 10
From the menu, select File > Deploy.
Step 11
Editing a Device
To edit a device:
From the Start menu, select Start > Programs > AdaptiveLogExporter >
Step 1
Configure Adapter Log Exporter.
The Adaptive Log Exporter appears.
Click the Devices tab.
Step 2
For the device type that includes the device you wish to edit, click + to expand the
Step 3
menu tree.
Description — Specify a description for this device. The description can be up
to 100 characters in length.
Device Address — Specify the IP address for this device. This is the IP
address this DSM uses to communicate with STRM.
STRM Adaptive Log Exporter
Configuring Devices
31