Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 200

194 M R
ANAGING EPORTS
Step 11
Select the desired distribution channels. Click Next.
Table 9-4 Report Distribution
Parameter Sub-Parameter
Report
Console
Email
Enter the report
distribution email
address(es)
Include Report as
attachment (PDF/RTF)
Include link to Report
Console
The Finishing Up window appears.
STRM Users Guide
Description
Select the check box if you wish to send the
report to the Reports interface.
Note: You must have appropriate network
permissions to share your report with other
users. For more information on permissions,
see the STRM Administration Guide.
Select the check box if you wish to distribute
the report using e-mail.
Specify the e-mail address(es) for each
destination you wish to send the report;
e-mail addresses are comma separated.
Maximum characters for this parameter is
255.
Note: E-mail recipients receive this e-mail
from no_reply_reports@STRM.
Select the check box to send the report as
an attachment.
Select the check box to include a link in your
e-mail.