Searching Networks - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual

124 I O
NVESTIGATING FFENSES

Searching Networks

Step 1
Step 2
Step 3
Step 4
Table 5-34 Offense Panel Toolbar (continued)
Icon Function
Actions Using the Actions drop-down list box, you can choose one of the
following actions:
Hide - Allows you to hide this offense. For more information on
•
hiding offenses, see
Show - Allows you to show all hidden offenses. For more
•
information on hiding and showing offenses, see
Close - Allows you to close an offenses. For more information on
•
closing offenses, see
To search networks:
Click the Offense Manager tab.
The Offense Manager window appears.
Click By Networks.
The Networks summary window appears.
Click Search.
The Network Search window appears.
Enter values for the parameters:
Table 5-35 Networks Search Parameters
Item Description
Network Specify the network you wish to search.
Magnitude Using the drop-down list box, select if you wish to search magnitude
equal to, less than, or greater than the configured value. The range is
0 to 10.
Vulnerability Using the drop-down list box, select if you wish to search vulnerability
Risk risk equal to, less than, or greater than the configured value. The
range is 0 to 10.
Threat Under Using the drop-down list box, select if you wish to search the amount
of threat the network is experiencing to be equal to, less than, or
greater than the configured value.
STRM Users Guide
Hiding Offenses
.
Closing an Offense
.
Hiding Offenses
.