Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 149

Table 6-7 Aggregate Normalized Events (continued)
Aggregate Option
Src IP / Dst IP/ Low
Level Cat
To view aggregate normalized events:
Click the Event Viewer tab.
Step 1
The Event Viewer window appears.
From the Display drop-down list box, select the desired option. For more
Step 2
information, see
The event information appears.
Note: The column layout of the data depends on the chosen display option.
The events window results provides the following information:
Table 6-8 Event Name Parameters
Parameter
Current Filters
Graphs
Legend Reference A colored box in this field associated this event to the graph.
Event Name
Description
Displays a summarized list of events grouped by the source
IP address to destination IP addresses and the low-level
category.
For more information on categories, see the Event Category
Correlation Reference Guide.
Table 6-7 Aggregate Normalized
Description
The top of the table displays the details of the filter applied to the
search results. To clear these filter values, click Clear Filter.
Displays a bar chart representing the top 10 aggregates,
depending on the chosen aggregate option. Click Hide Chart if
you wish to remove the graph from your display.
Specifies the normalized name of the event.
STRM Users Guide
Viewing Events
Events.
143