Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 56

50 M S
ANAGING ENTRIES
Step 5
Enter values for the parameters:
Table 4-6 Behavior Sentry Parameters
Parameter
Current traffic level
Current traffic trend
Current traffic behavior
STRM Users Guide
Action
Specify the weight (1 to 100) that you wish to assign to the
current traffic levels against the learned behaviors and the
current trend. The higher the value indicates more weight
on the previously recorded value.
Specify the weight (1 to 100) that you wish to assign to
current traffic trends against the calculated behavior. The
higher the value indicates more weight on traffic trends
than the calculated behavior.
Specify the weight (1 to 100) that you wish to assign to
current traffic behavior against the learned behaviors. The
higher the value indicates more weight on the learned
behavior