Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 35

Your network administrator can enable or disable any Global View. Disabling
views saves processing power on large structured networks. Depending on your
current network activity or the type of traffic you are monitoring, some views may
be of more value than others.
Note: You must have administrative permissions to enable/disable views. For
more information, see the STRM Administrator Guide.
Network Surveillance graphs provides the following:
X-Axis Grid - The X-axis displays the time. You can also pan the graphs to
•
display the traffic for another time
Y-Axis Grid - The Y-axis measures the amount of traffic displayed on the
•
graph. This can represent the volume of traffic based on the selected layer such
as packets, bytes, or number of hosts. The measured increments change as
you zoom in on the graph.
Inbound - Inbound (selected layer such as bytes, packets, or hosts) displays
•
the inbound traffic activity.
Outbound - Outbound (selected layer such as bytes, packets, or hosts)
•
displays the outbound traffic activity.
Double Arrows - The double arrows, located at the top of each graph allow you
•
to navigate through time and display previous activity. Click the arrows on the
top left to move back the same time increment as currently displayed on the
graphs. Click the arrows on the right to move ahead the same time increment
as currently displayed on the graphs.
Triple Arrows - The triple-arrows located at the top of each graph allow you to
•
navigate between screens that you previously displayed. Click the arrows on
the top left to move back to the previously displayed graph. Click the arrows on
the right to return.
Count-Down Timer - The count down timer counts down, in seconds, and
•
displays the time before STRM refreshes your network information.
STRM Users Guide
Viewing Network Activity 29