Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual page 143

Double-click the event you wish to view in greater detail.
Step 3
The event details window appears.
The details results provides the following information:
Table 6-4 Event Details
Parameter
Event Name
Low Level
Category
Event Description
Severity
Credibility
Relevance
Magnitude
Source IP
Source Port
Destination IP
Destination Port
Pre NAT Source
IP
Description
Specifies the normalized name of the event.
Specifies the low-level category of this event.
For more information on categories, see the Event Category
Correlation Reference Guide.
Specifies a description of the event, if available.
Specifies the severity of this event.
Specifies the credibility of this event.
Specifies the relevance of this event.
Specifies the magnitude for this event.
Specifies the source IP address of the event.
Specifies the source port of this event.
Specifies the destination IP address of the event.
Specifies the destination port of this event.
Network Address Translation (NAT) translates an IP address in
one network to a different IP address in another network. For a
firewall or another device capable of NAT, this parameter
indicates the source IP address before the NAT values were
applied.
STRM Users Guide
Viewing Events 137