Juniper NETWORK AND SECURITY MANAGER NSM3000 - QUICK START REV 1 Quick Start Manual page 33
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER NSM3000 - QUICK START REV 1:
- Manual (100 pages)
Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Figure 36: Configuring a Syslog Receiver
In the Name field, enter a name for the syslog receiver. This is the name that the syslog
5.
receiver will be known by within NSM.
In the IP field, Enter the IP address of the syslog receiver.
6.
In the Transport field, select the type of syslog receiver:
7.
Select UDP for basic syslog implementations.
Select TCP for rsyslog or syslog-NG implementations.
Managing System Administration
33
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER NSM3000 - QUICK START REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER NSM3000 - QUICK START REV 1
- Juniper NSMXPRESS - REV 1
- Juniper NETSCREEN-ISG 2000
- Juniper NETSCREEN-200 SERIES
- Juniper NFX250
- Juniper NFX350
- Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3
- Juniper NETWORK AND SECURITY MANAGER NSMXPRESS - REV1
- Juniper NETWORK AND SECURITY MANAGER NSMXPRESS