Juniper NETWORK AND SECURITY MANAGER NSM3000 - QUICK START REV 1 Quick Start Manual page 36

NSM3000 Quick Start
36
Figure 38: Create NSMXpress User Dialog Box
Enter the user name in the
3.
Select Unix authentication
4.
Confirm Password text boxes will be disabled since the password will be fetched from
the local OS.
From the drop-down list box, select the user profile you want to associate
User Profile
5.
with the local user in the WebUI.
Click . The NSMXpress Users dialog box appears with the new NSM appliance
6. Submit
user listed.
To create a WebUI user:
Select System Administration > User Management
1.
appears listing all NSM appliance users. See Figure 39 on page 36.
Figure 39: NSMXpress Users Dialog Box
Click Create a new NSMXpress User
2.
Enter a user name in the
3.
Select from the password drop-down list and enter the password you want to
Set to
4.
set in the password text box.
Reenter the password in the
5.
text box.
Username
from the Password drop-down list. The Password and
. The NSMXpress Users dialog box
. The Create NSMXpress user dialog box appears.
text box.
Username
text box.
Confirm Password
Copyright © 2010, Juniper Networks, Inc.