The Tool Box; Verifying The Ip Settings - Dell 1350 Color User Manual

24 Turn off and turn on the printer.

The Tool Box

NOTE:
NOTE:
When you use IPv6 Mode for network printing, the Tool Box cannot be used
to assign an IP address.
1 Click Start

Printer Tool Box.

NOTE:
drivers are installed on your computer. In this case, click the name of Dell
1350cnw Color Printer listed in Printer Name, and then click OK.
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select TCP/IP Settings from the list at the left side of the page.
The TCP/IP Settings page is displayed.
4 Select the mode from IP Address Mode, and then enter the values in IP
Address, Subnet Mask, and Gateway Address.
5 Press the Apply New Settings button to take effect.
The IP address is assigned to your printer. To verify the setting, open the web
browser on any computer connected to the network and enter the IP address
into the address bar on the browser. If the IP address is set up correctly, the Dell
Printer Configuration Web Tool displays in your browser.
You can also assign the IP address to the printer when installing the printer
drivers with installer. When you use the Network Installation feature, and the
Get IP Address is set to AutoIP on the operator panel menu, you can set
the IP address from 0.0.0.0 to the desired IP address on the printer selection
window.

Verifying the IP Settings

1 Print the printer settings page.
See "Printing and Checking the Printer Settings Page" on page 42.
All Programs

The Select Printer dialog box opens in this step, when multiple printer
Dell Printers Dell 1350cnw Color

Setting the IP Address
41