Dell 1350 Color User Manual page 137

Ghost Click Start to print a chart to check for ghost printing.
4Colors Click Start to print bands of yellow, magenta, cyan, and black with
varying density.
Alignment Click Start to print a chart, and then check for proper alignment of
the print image on the paper.
Drum Refresh Click Start to print a chart to check the light fatigue of the drum
cartridge.
Reset Defaults
Purpose:
To initialize NVM (non-volatile memory) for system parameters. After
executing this function and rebooting the printer, all the menu parameters,
except the parameters for the network, are reset to their default values.
Values:
Reset Defaults Click Start to initialize the system parameters.
and restart
printer.
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
Using non-Dell-brand toner cartridges may make some printer features
unusable, reduce print quality and decrease the reliability of your printer. Dell
recommends only new Dell-brand toner cartridges for your printer. Dell does not
provide warranty coverage for problems caused by using accessories, parts, or
components not supplied by Dell.
NOTE:
Before you use toner cartridge of another manufacturer, be sure to restart
the printer.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
Dell Printer Configuration Web Tool
133