When Using The Tool Box - Dell 2150cn User Manual

admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section08.fm
10 Use
press
The cursor moves to the next digit.
NOTE:
after entering each octet.
11 Enter the rest of the octets, and then press the
12 Press
(Set) button.
13 Repeat steps 10 and 11 to set Subnet Mask, and then press the
button.
14 Press
press the
15 Repeat steps 10 and 11 to set the Gateway Address, and then press the
(Set) button.
16 Turn off the printer, and then turn it on again.

When Using the Tool Box

NOTE:
1 Click Start
Tool Box.
NOTE:
printer drivers are installed on your computer. In this case, click the name of
this printer listed in Printer Names, and then click OK.
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select TCP/IP Settings from the list at the left side of the page.
The TCP/IP Settings page appears.
4 Select the mode from IP Address Mode, and then enter the values in IP
Address, Subnet Mask, and Gateway Address.
5 Press the Apply New Settings button to take effect.
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
Downloaded from ManualsPrinter.com Manuals
FILE LOCATION: C:\Users\fxstdpc-
and buttons to enter the first octet of the IP address, and then
button.
You can only enter one octet at a time and must press
and buttons until Subnet Mask appears, and then press the
and buttons until Gateway Address appears, and then
(Set) button.

All Programs
The Select Printer window appears in this step when multiple
 
Dell Printers
Setting the IP Address
(Set) button.
(Set)
Dell 2150 Color Printer
button

85