Dell 1350 Color User Manual page 225

IPv4 Get IP
Address
IP Address
Subnet Mask
Gateway Address
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the
printer is turned off and then on.
Values:
LPD
Port9100
WSD
SNMP UDP
E-Mail Alert
EWS
Bonjour (mDNS) Enable*
Panel
Enables the IP address entered on the operator
panel.
AutoIP* Automatically sets the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
DHCP Uses DHCP to set the IP address.
Manually sets the IP address allocated to the printer.
Manually sets the subnet mask.
Manually sets the gateway address.
Enable* Enables the LPD port.
Disable Disables the LPD port.
Enable*
Enables the Port9100 port.
Disable Disables the Port9100 port.
Enable*
Enables the WSD port.
Disable Disables the WSD port.
Enable* Enables the UDP port.
Disable Disables the UDP port.
Enable* Enables the E-mail Alert feature.
Disable Disables the E-mail Alert feature.
Enable* Enables an access to Dell Printer Configuration
Web Tool embedded in the printer.
Disable Disables an access to Dell Printer Configuration
Web Tool embedded in the printer.
Enables the Bonjour (mDNS).
Disable
Disables the Bonjour (mDNS).
Understanding the Printer Menus
221