Network Printer Setup On A Remote Network - Dell 1350 Color User Manual

Network Printer Setup on a Remote Network

Before Installation
Before you start remote installation, perform the following procedures.
Allow Print Spooler to Accept Client Connections
NOTE:
This step is required for Windows XP 64-bit Edition, Windows Vista,
Windows Vista 64-bit Edition, Windows Server 2003, Windows Server 2003 x64
Edition, Windows Server 2008, Windows Server 2008 64-bit Edition, Windows Server
2008 R2, Windows 7, and Windows 7 64-bit Edition.
For Windows XP 64-bit Edition, Windows Vista, Windows Server 2003, and
Windows Server 2008:
1 Click Start

Windows Vista only)
2 Type gpedit.msc, and then click OK.
3 Click Computer Configuration
4 Right-click Allow Print Spooler to accept client connections and select
Properties.
5 On the Setting tab, select Enabled, and then click OK.
6 Restart the computer.
For Windows Server 2008 R2 and Windows 7:
1 Click Start  All Programs (for Windows 7 only)
Windows 7 only)
2 Type gpedit.msc, and then click OK.
3 Click Computer Configuration  Administrative Templates  Printers.
4 Right-click Allow Print Spooler to accept client connections and select
Edit.
5 Select Enabled, and then click OK.
6 Restart the computer.
All Programs (for Windows Vista only)
Run.

Run.

Installing Printer Drivers on Computers Running Windows
Administrative Templates

Accessories (for

Printers.

Accessories (for

63