Dell 1350 Color User Manual page 224

WPS
NOTE:
This item is displayed only when the printer is connected with a wireless
network.
Reset Wireless
Purpose:
To initialize wireless network settings. After executing this function and
rebooting the printer, all wireless network settings are reset to their default
values.
NOTE:
This item is displayed only when the printer is connected with a wireless
network.
TCP/IP
Purpose:
To configure TCP/IP settings. The change becomes effective after the printer is
turned off and then on.
Values:
IP Dual Stack*
Mode
IPv4 Mode
IPv6 Mode
220
Understanding the Printer Menus
Push
Configures the wireless setting with the security method
Btn. Ctrl of WPS-PBC.
PIN Start Config.
Code
Print PIN
Code
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Uses IPv6 to set the IP address.
Configures the wireless setting using the
PIN code assigned automatically by the
printer.
Prints the PIN code. Confirm it when you
enter the PIN code to your computer.