Apply New Settings
Restart printer to apply new
settings
TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Values:
IP Address
AutoIP*
Mode
DHCP
BOOTP
RARP
Manually Set Manually sets the IP address.
IP Address
Subnet Mask
Gateway Address
Apply New Settings
Restart printer to apply new
settings
Network Settings
Purpose:
To display the server settings of the Dell Printer Configuration Web Tool.
NOTE:
When the printer is connected to the USB port, this setting cannot be
displayed.
Values:
Print Server
Display
Settings
After you complete the settings, press the Apply New
Settings button to apply the changes.
Press the Restart printer to apply new settings button
to apply the changes.
Automatically sets the IP address.
Uses DHCP to set the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Manually sets the IP address allocated to the printer.
Manually sets the subnet mask.
Manually sets the gateway address.
After you complete the settings, press the Apply New
Settings button to apply the changes.
Press the Restart printer to apply new settings button
to apply the changes.
Click to display the server settings for the Dell Printer
Configuration Web Tool.
Understanding the Tool Box Menus
209